Using a Table Saw includes using and adjusting the table saw fence system and aligning the blade, along with a variety of jigs or fixtures built for the Table Saw. The table saw is more complicated they most pieces of woodworking equipment, and care should be give that all the parts are set-up to work together.
Table Saw Techniques
For the majority of woodworking shops, the tool which plays one of the most important roles, and has the highest frequency of use, is the table saw. For as much as the table saw is used, there are many hobbyists and professionals alike who do not have a complete understanding of current philosophies for operation. There is plenty of information out there about which is the best saw or the best fence or the best blade. I don't want to rehash these issues. There is a significant amount of information regarding table saws which is not normally discussed in manuals or other informational sources, and this is where I would like to concentrate.
For many, a table saw is a must if you are building houses or just love to work with wood, but in order for it to perform and to keep you from being injured, your table saw should be balanced at least once a year. These instructions are for a contractor-style table saw. Although the basics are the same on most table saws, you should still follow the instruction manual that came with your table saw.
A table saw jig exists to make almost every table saw task more accurate and safer. Among the basic table saw jigs that woodworkers find most helpful are a miter sled and miter fence, a push block, a rip fence and a rip jig. Find more information below about these basic jigs that you can buy or make for your table saw.
Advice on keeping a table saw blade parallel to the fence, and some general observations on accuracy and tolerances. I would say the first thing you should check on is bearing wear. With the belts off the arbor pulley, spin the arbor and try to feel for any hesitation, spots that turn harder or even grinding, etc. If you don't notice any of these traits, grab the arbor and try to wiggle it - put the indicator on the arbor while you do this and watch your needle.
Ripping wood is a primary function of the table saw, and because its importance, many manufacturers pay particular attention to the quality the rip fence on the saws they offer. Still, many factory fence systems lack the reliability and precision that would qualify them for exacting work. In this article, we’ll look at the basic requirements for good table saw ripping, and how an after-market fence system.
A table saw fence guide is sometimes called a rip fence guide. This tool can be handy when using a table saw on more projects than just making fences. A fence guide can help you cut large amounts of materials that need to a uniform length or width.
When fibers, splinters, or even sizable chunks of wood break away from your workpiece while you're cutting or shaping it, that's chip-out. Fortunately, you can avoid nearly all of that surface damage by taking a moment to prepare before you cut, rout, or joint a piece of wood. Follow two basic rules to prevent chip-out: Use sharp cutting tools, and provide solid backing for surfaces that are likely to be damaged. We'll describe here some of the best ways to lend that support, no matter which cutting tool you use.
Don't Forget to
Bookmark our site.
Woodworking Tool Reviews